SAWING, PLANING AND SHAPING CHARACTERISTICS OF FIVE MANGROVE SPECIES.

Authors

  • M. Obaidullah Hannan Forestry and Wood Technology Discipline, Khulna University, Khulna-9208, Bangladesh
  • A.K. Fazlul Hoque Forestry and Wood Technology Discipline, Khulna University, Khulna-9208, Bangladesh
  • Md. Anisul Islam Forestry and Wood Technology Discipline, Khulna University, Khulna-9208, Bangladesh

DOI:

https://doi.org/10.53808/KUS.1999.1.1.21-23-se

Keywords:

Sawing; Planing; Shaping; Mangrove wood; Wood Technology.

Abstract

Sawing, planing and shaping characteristics of five mangrove species, viz., baen ( Avicennia officinalis), gewa (Excoecaria agallocha), kankra (Bruguiera spp.), passur (Xylocarpus mekongensis) and sundri (Heritiera fomes) were studied. Three types of band saw blades, viz., spring set, swage set and stellite tipped, were used for sawing operation. Of these saws, stellite tipped blades showed excellent ripping performance in sawing sundri, passur and kankra whereas swaged set saws performed better in ripping gewa, baen and passur. In planing test the performance of kankra was average and others were average to poor in quality. In shaping test kankra showed good shaping quality, baen and gewa were fair, and sundri and passur were poor.

Downloads

Download data is not yet available.

References

Anon, 1969. Book of ASTM Standard, Part 16. D 1666-64. Americal Society for Testing Materials, pp. 566- 590.

Bhattacharjee, D.K. and Sattar, M.A., 1987. Physical and mechanical properties of kankra and passur. Timber Physics Series, Bulletin 11. Bangladesh Forest Research Institute, Chittagong, 8 pp.

Chaffey, D.R., Miller, F.R. and Sandom, J.H., 1985. A forest inventory of the Sundarbans, Bangladesh. Main Report, Overseas Development Administration, UK., 140 pp.

Davis, E.M., 1962. Machining and related charteristics of United States hardwoods. US Dept. Agr. Tech. Bul. No. 1267, 68 pp. Khaleque, M.A. and Hannan, M.O., 1993. Machining and handtool properties of five mangrove species. Woodworking Series, Bulletin 8. Bangladesh Forest Research Institute, Chittagong, 7 pp.

Koch, P., 1964. Wood Machining Processes. The Ronald Press Co., NY., 530 pp.

Reza, N.A., Kibria, M.G., Waziullah, A.K.M., Chowdhury, M.H., Rahman, A. and Islam, S.S., 1992. Forest Statistics of Bangladesh. Forest Economics and Statistics Division, Bulletin 3. Bangladesh Forest Research Institute, Chittagong, 54 pp.

Sattar, M.A., 1981. Some physical properties of 116 Bangladeshi timbers. Wood Seasoning Series, Bulletin 7. Bangladesh Forest Research Institute, Chittagong, 15 pp.

Sattar, M.A. and Bhattacharjee, D.K., 1983. Strength properties of keora. Timber Physics Series, Bulletin 7. Bangladesh Forest Research Institute, Chittagong, 6 pp.

Sattar, M.A. and Bhattacharjee, D.K., 1988. Physical and mechanical properties of sundri and baen. Timber Physics series, Bulletin 10. Bangladesh Forest Research Institute, Chittagong, 8 pp.

Downloads

Published

28-05-1999

How to Cite

[1]
M. O. Hannan, A. F. . Hoque, and M. A. . Islam, “SAWING, PLANING AND SHAPING CHARACTERISTICS OF FIVE MANGROVE SPECIES”., Khulna Univ. Stud., pp. 21–23, May 1999.

Issue

Section

Science and Engineering

Similar Articles

<< < 1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)